• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Working With Woods: Tips And Tricks

By The Carpenter

There are different aspects to woodworking. You can create beautiful or useful things in many different ways. If you want to start woodworking, then you found the right article. The information you glean here can be all you need to get a new project underway.

TIP! If you are going to be staining your project, test on a scrap of wood or an inconspicuous area. This will help you to pick the right stain color for your project.

Consider making your own sanding blocks that are reusable. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use. Your blocks should be 2.5 x 4.75. Apply spray adhesive to secure the cork tile to the blocks. Cut the sandpaper with a utility knife to better fit your block. Use spray glue on sandpaper and stick it to the block. You can make smaller blocks if you wish as well. These can be used for smaller pieces demanding finer sanding.

You can make your crosscut guides using stair gauges. To use, clamp the gauges to a carpenter square. Then use a pencil to mark the notches. Putting them onto the tongue of the carpenter’s square will produce a good crosscut guide for the circular saw.

TIP! Use stair gauges for crosscut guides. Clamp your carpenter’s square to your stair gauges while ensuring they coincide with the rise and run of your stair jack.

Be sure that you are realistic about what your budget allowance can accommodate. Keep in mind that complicated projects are often the most expensive ones. You are very excited to make something, just to realize halfway through that you don’t have enough money to finish it how you want. Before taking anything on, know what you’re getting into.

While you might like keeping a small ruler handy in your pocket, you probably find that it falls out every time you bend over. Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws. Keep them both in the same exact pocket. This will hold the two together, making them bulking enough to stay put.

Golf Tee

If your interior doors have loose hinges, you can simply fix it with a golf tee. Just take the door off the hinges and tap the golf tee into the offending screw hole. Then, cut the golf tee’s excess off and reinstall the door. The screw has something to bite on with the golf tee.

TIP! All woodworking shops should have stair gauges. These gauges are used to lay out stair jacks but they are also very useful if you need something to clamp a carpenter’s square.

Is there a screw that needs tightening, but it is located in an unreachable spot? Dive into your toolbox. Get out your 12 point socket and a screwdriver. Get the socket fitted to your screwdriver and then attach that to the ratchet you like to use the most.

You can turn woodworking into a career if you continue to build your skills. The tips and tricks from this article should inspire you to become better at the craft of woodworking.

Filed Under: Woodworking Tips Tagged With: golf tee

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com