Look around as you move throughout your day. You see examples of man’s mastery of woodworking everywhere. From mailbox posts to pieces of furniture and art to full buildings, the power to use wood to create is a reason why civilization even gets to exists in many corners of the world. If you want to empower yourself with this skill, keep reading.
Safety must be a priority when doing woodworking. Use the tools correctly and wear the right equipment. Don’t take guards off the power tools. This will reduce the chances for severe injury.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
Be sure your blade sharp prior to trying to cut. A dull blade will make it nearly impossible to cut something as needed. Dull blades can also cause costly errors due to damage to your wood.
Now that you have read this article, you know a few things about getting started successfully in woodworking. Use the ideas here to do a project that improves your life. Perhaps you build yourself a deck. Maybe you give new life to a piece of furniture someone got rid of. Whatever your inspiration, this article gave you the knowledge to get some woodworking done!
Leave a Reply