Everyone loves to do certain activities in their spare time. Woodworking is such an enjoyable hobby to engage in that even those who do it for a living will also take it on as a pastime. That said, anyone who loves to work with wood will benefit from reading the tips below.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
When using stain, try a test on a small scrap you may have available or in an area on the wood that will be out of sight. This will allow you not to have any surprises later if the stain’s color looks different when it is applied. Keep in mind that it is not easy to guess how wood stain will turn out; therefore, you should always test out the stain on a piece of wood to prevent disappointment.
Sign up for a woodworking or shop class at a local school. You can definitely teach yourself a lot about woodworking, but there’s nothing better than learning from a professional. You’ll pick up important skills much more quickly, and you’ll make a lot of great friends along the way.
Before you cut into a piece of wood, you need to inspect it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not only damage your blades, but also pose a safety hazard. Always inspect the wood before you cut.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Sturdy footwear is essential when woodworking. There are sure to be lots of nails, tools and wood chunks everywhere you step. Your feet deserve protection from the inevitable stepping on a nail as well as you accidentally kicking or dropping something heavy. Your shoes should be sturdy enough to withstand your walking around the work environment.
If dust and dirt get into the holes of a brad or nail gun while they are not in use, this can cause them to wear out more quickly. It is a good idea to plug the air inlet holes up with something to prevent anything from getting in there.
Make sure there are no spots of glue on the wood before proceeding to finish your project. The spots will show up as lighter spots after the finish has been applied. You can use mineral spirits of naptha to completely remove all traces of glue from the wood. You may also be able to remove the glue by sanding the wood.
These tips have provided you with a great deal of knowledge you likely haven’t heard about before. Thanks to reading this article, you now have some ideas which will help you better your work. The results will be astounding and you will be so please with how much your skills progress.