Woodworking is one of the oldest artisan crafts available to people in modern-day society. However, the slow, time-consuming craft often can feel out of place in the hustle and bustle of today’s business market–despite the high demand for beautiful, skillfully created pieces. With some time and consideration, you can make a place for your woodworking business, even in the sea of modern technologies.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Gel stains are something that you can get a lot of use out of when you’re staining items that are going to be used for furniture. Gels stains seem to hold onto the lumber better where liquid stains have the tendency to run when applied. Also, gel stains are thick and their pigment stays consistent.
When you install your hacksaw blade, make sure the teeth face forward. They are designed to cut when pushed using a forward stroke instead of a pulled stroke. Some of these blades have arrows pointing toward the handles that show the correct way to install them. Install it making sure it is tight and cannot bend. When you do lots of cutting, your blade heats up and expands, so make sure you tighten it before it begins bending.
If you have your own table saw, you will eventually have to crosscut some wood. This can bring your fingers very close to the saw guard and blade. If the saw kicks back, you could be headed to the hospital. It is best to cut a block of wood to push the wood through the saw with.
Rulers don’t like to stay in pockets, but you need them to be handy! Try switching to a metal ruler, keeping it in a pocket with your telescoping magnet, the kind used to reach and pick up screws or nails. The magnet will keep everything in your pocket.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
Stumped on a good woodworking project? Take a walk around your home. There are always things around your home that need fixing. Or you may see an area that could use something new that can be created with your skills. Let your house become the inspiration for what you really need.
When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you will have a little bit of extra wood to cut off or utilize to make up for the difference.
Although many naysayers will tell you woodworking is a dying craft, there is no statement further from the truth. Every day, people require woodworking for construction, home improvement projects, art, and countless other uses. By taking into consideration the demand for your product and utilizing your skills effectively and efficiently, you can ensure the success of your woodworking business.