Have you admired a beautiful piece of furniture and dreamed of creating such an item yourself? Do you have a need for a new shelf and want to build it on your own? Regardless of why you want to get involved in woodworking, the advice below will help you get your start.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
Before applying glue, try a dry fitting first. If you don’t and then try to do adjustments, chances are you’ll create damage to your project. A dry-fit helps you figure out where to put things.
Even though it is smart to carry a small ruler, sometimes it might fall out when you are working. If it falls out, try buying a metal one and use a magnet for picking up screws to keep it from falling out. The magnet will keep the ruler safely in your pocket.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
To get off on the right foot, use these tips as you plan out your next project. That will allow you to use the right techniques to ensure your end result is on target. Once you get that project under your belt, you’ll be able to complete others and truly enjoy woodworking as a hobby.