Introducing yourself to woodworking as an art can be an exciting time. However, many people get quickly discouraged because they feel there is too much of a complexity to the field. Instead, you must understand that all creations are unique and that you just need to slow down and enjoy yourself. Continue reading for some helpful tips about embracing woodworking as a hobby.
You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Remember the quote, “Measure twice, cut once.” When it comes to cutting wood, you always want to ensure you have the right measurements before you begin cutting. Otherwise, you will have to buy more wood, which will cost you a lot of money. You can avoid this dilemma by ensuring proper measurements.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
If you are working with wood, it can be very dangerous to have a messy workshop. Do everything you can to keep your work area clean and well-maintained. Every time you are done with a specific tool, out it away before you get another. It may seem like this is time consuming, but you won’t have any reason to clean up later.
Save some money and practice your woodworking skills by building essential items for your work space. Build some counters to work on and a work bench. Get creative and you can make your work space even more organized and efficient since you have the ability to organize the area.
The most important part of any woodworking project is safety. There are many sharp tools that need to be used and you should be very careful when using them. Find out the proper way to use these tools. If they are power tools, read the manual. If they are hand tools, have a professional show you how to use them properly.
Keep safety in mind as you work with your table saw. If you are making a crosscut, set the length for the cut by clamping a block to the fence. This is preferable to simply using the fence because it will prevent having your board spring back. Clamping can leave the end of your board free for cutting.
Are you ready to get out there and be a woodworking hobbyist? What do you plan to create? Hopefully the tips that have been explained can help you get going with your art. It’s going to be fun, and you just never know what you might end up making.