Woodworking can be a fascinating hobby or it can be a lucrative career. Whether you would like to do it for a living or would simply like to pursue it as a weekend hobby, this article is for you. Use these tips to help inspire you to become a better woodworker of this fascinating art.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
If you are bored using power tools for your woodworking project, try your hand at using classic manual tools. For hundreds of years people used no power in their woodworking. Everything was done by hand. It is a challenging way to add some excitement and pride to your next woodworking project.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Test the color of a stain before doing the complete stain on more visible areas. Wood is never predictable, so a stain may not look the way you expect or need it to when applied to the wood you are using. When you test the stain in a spot that’s not easily visible, you prevent having a project turn out badly.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
There is much to learn about woodworking but luckily it is an enjoyable skill to learn about. Many people find it to be a relaxing hobby while other pursue it as a full time passion. use the tips from above to enhance your love of woodworking and to help you enjoy it even more.