You probably don’t consider yourself a woodworker, or maybe just not a good one. But imagine what you could do if you were. Could you help build structures and buildings? Would you be able to make artistic pieces? Could you restore furniture? If any of these possibilities interest you, keep reading for knowledge you need on woodworking.
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
If you are bored using power tools for your woodworking project, try your hand at using classic manual tools. For hundreds of years people used no power in their woodworking. Everything was done by hand. It is a challenging way to add some excitement and pride to your next woodworking project.
When working with wood, consider the grade of wood you are using. Wood can be costly and it is not always necessary to use a high-cost wood. If budget is a concern, look at the durability and strength of different woods that may come in a little cheaper and still work for your project.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
When you have skill in woodworking, you have the power to take a raw natural resource and make things with it. Use the tips, tricks and techniques to make your life a more enjoyable one. Build that deck you want behind the house, or restore an old piece of furniture, either for yourself or for profit.