While we are in the 21st century, the fact is that age old crafts still create the best results. For example, working with wood allows us to build durable, gorgeous furniture pieces incomparable with those offered at retail outlets. To better your woodworking skills, check out the tips below.
Safety is the most important aspect of a project. Be certain to use all tools correctly and observe all safeguards. Don’t ever remove the guards from your power tools; they are in place for your protection. Avoid doing a project and having to go to the hospital.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
Do you lose drill press key chucks often? A good way to keep them within reach is to drill a hole somewhere on the drill press they fit. On top of the press is a good place, where you can see it. Drill a small hole the exact same size of the chuck’s crossbar and it will fit in perfectly.
Stumped on a good woodworking project? Take a walk around your home. There are always things around your home that need fixing. Or you may see an area that could use something new that can be created with your skills. Let your house become the inspiration for what you really need.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Keep your work area as clean as possible. Woodworking creates a lot of mess, especially dust. This dust can get into your home and eventually into your lungs. This can cause real health problems down the road for you and your family. So take a few minutes after a job, and sweep up your space.
If you want an exciting hobby with concrete rewards, woodworking is it. The ability to go back to the old school methods of creating whatever it is you need builds skills which will better your life in many ways. Take what you’ve learned and make your next project into a reality.
Leave a Reply