• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Woodwork: We Provide You With The Real Truth

By The Carpenter

If you want to improve your woodworking skills or learn new skills, this is the article to read. The following article has advice to help people of all levels. If learning new things is your goal, the article that follows should prove ideal.

Stair gauges are very important devices for you to use. Match them to the rise and run of your stair jack, then attach them to the carpenter’s square. Mark the notches in them. If you do it properly, you will have an excellent crosscut guide.

TIP! You can make your crosscut guides using stair gauges. Clamp them to the carpenter’s square, then ensure that they match up with the jack’s run and rise.

Understand that safety should be your top concern with woodworking. Use the tools correctly and wear the right equipment. When your power tools are on, you should always be wearing safety equipment. Hospitalization is not the goal of woodworking.

Make sand blocks that you can reuse. Make a list of each sandpaper grit that you typically use, and then cut a full six blocks for each from scrap plywood, 3/4″ thick. Be sure that the measurements are around two-and-a-half inches by four-and-three-quarters inches. Use an adhesive spray on the blocks as well as your cork tile square. Stick a block on your cork, then make certain you cut the cork flush with a utility knife. Use spray glue on sandpaper and stick it to the block. At the end, trim the sandpaper and label each block.

Your workbench’s height is important in woodworking. To find the perfect height of your workbench measure the distance between the midline of your waist and the floor. A perfect height will help you be more efficient.

TIP! Do you realize that your workbench height is key to the success of your projects? Your work bench’s perfect height can be found by measuring how far it is between the floor and your waist’s midline. This will allow you to have the best height for your workbench.

If you are going to be staining your project, test on a scrap of wood or an inconspicuous area. By doing this, you can prevent unwanted surprises in the event that the stain color turns out differently than you expected. Wood tends to be unpredictable, so avoid disappointment and mistakes by doing a simple test.

Gel Stains

Put together a detailed budget for all your projects. Sometimes your eyes are larger than your wallet when you have a particular project in mind. You’re excited to make an item, only to find half way through that the money just isn’t there to complete it the way you want. Avoid surprises by doing your homework before beginning.

TIP! Understand your budget’s limitations. Many times you might think on a grand scale, but in reality you don’t have the money to complete the project.

One of the more recent developments in stains are gel stains. Liquid stains have a tendency to run but gel stains will stay in place better, without running. Furthermore, since a gel stain is thicker it tends to remain constant through the application process, which lets it be more even on the furniture.

If you rent a tool, ask for a tutorial on how to use the tool. The people that work for these companies have representatives well-versed in the tools they rent. They can get you up to speed. Also ask if there are handouts available with tips for tool usage.

When creating your budget, never forget to add the each new tool that you will have to purchase. You may overlook this and not factor in the cost. But if there are things you are going to need that you don’t have, they can be budget breakers if you aren’t careful.

TIP! When putting together your budget for a project, do not forget to include the cost of new tools. You may overlook this and not factor in the cost.

Always know the specific characteristics of the wood you are working with before you begin a staining project. Wood that is paint grade is not high quality. On the other hand, wood that is stain grade will stain better. Differentiate between veneer and particle board as veneer tends to resist stain, while particleboard can take on too much stain. Getting the right wood helps ensure your project turns out the way you expect.

You should have a good understanding of the different types of wood available to you and their many characteristics. Each type of wood has different traits. Different types of wood stain differently. They will splinter in different ways, based on how you cut. And, there are quite a few varieties when it comes to grains. All of this will become factors in your woodworking project.

When renting tools that you are unfamiliar with, speak with the company about getting a lesson on how to use it. They’ll have experts who know how to teach you the ropes. Ask for handouts and manuals as well.

Golf Tee

You can use a golf tee to help tighten up the hinges of an interior door. Take off the door, then remove the hinges. Then gently hammer the golf tee into the screw holes. Trim off the end of the tee still sticking out and hang the door again. The screw will be able to then hold on to the golf tee in order to function properly.

A good method in laminating a wood project is by using tip snips to trip the laminate. These make cutting laminate much easier. Use the tin snips for laminate only so they stay sharp.

TIP! Tin snips can help you better trim laminate when doing your wood projects. These can cut the laminate that you use to the appropriate size.

Look for free wood sources. Often business will grant you permission to haul off unwanted pallets. Rather than break down the pallet, though, search the Internet to see what can be done with it.

Footwear is an important component of your safety equipment. The environment in which you work will have many nails, sharp pieces of wood and heavy tools. It is important to always protect your feet. Injury can happen if you drop a heavy tool, kick something heavy, or step on a sharp object. The shoes you wear must be sturdy so as to protect your feet from injury in your work environment.

Make sure to use the right nails. If a nail is too thick it can split the wood, and this will stop it from holding properly. However, very small nails do not penetrate well; therefore, they won’t hold the wood. It is important that you find properly sized nails in order to have a successful project.

TIP! Choose correctly-sized nails. If you get something too big, the wood may break and not be very secure.

As stated at the start of this article, what you read above is full of great tips for woodworkers of any skill level. You are sure to have found helpful tips you can use for your next woodworking project. All you need to do now is get started on your next endeavor!

Filed Under: Woodworking Tips Tagged With: gel stains, golf tee, safety equipment, woodworking project

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com