Woodworking is a craft and a skill that has been around for centuries. It is a valuable trade to have experience with and can be infinitely useful in many ways. Skilled woodworkers can earn a good living with their hands and many enjoy woodworking just for the joy of it.
Practice some table saw safety. When crosscutting with a table saw, set your cut length with the block clamped to your fence. Do not use your fence directly for avoiding get kicked back by a board directly. You need to clamp the block of wood to your fence before your blade. The board’s end is free of the fence when you cut and after you cut.
Gel stains are an excellent choice for furniture staining. Gel stains adhere to wood better, while liquid stains run a lot more. Also, gels are thicker so they will remain consistent during the entire application process.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
If you plan on applying any gloss or stain to a piece of wood, it is very important that you sand it down first. Failing to do this step will result in a wood surface that is not very smooth. Use sandpaper to smooth things down then make sure all dust s removed by brushing it with a cloth.
As you already know, woodworking is a very valuable skill. Whether you are building a big projects such as a house or smaller projects such as a small bird house, woodworking has so much to offer. Hopefully the tips from above have given you ideas on new ways to use this valuable skill.