Are you thinking about doing woodwork but don’t know how? This is the focus of this article. Woodworking is challenging to those new to it, but with the right ideas, you get going with a lot more ease. The tips below can help you today!
Reusable sanding blocks made by yourself will save money. Use a scrap of 3/4″ plywood to cut six blocks, one for each sandpaper grit you need. Be sure that the measurements are around two-and-a-half inches by four-and-three-quarters inches. Put spray adhesive on the blocks and the tile square. Put one piece of cork on each block and line it up flush. After spraying adhesive on a sheet of sandpaper, place it on the block face of each cork. Lastly, cut the sandpaper flush with the cork, and label each block.
A great tool for setting crosscut guides is a stair gauge. Just clamp them on your carpenter’s square while making sure they match up. Be sure to mark the location of the notches. If you do it properly, you will have an excellent crosscut guide.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Make sure to use the right nails. If the nail is too large, you could end up with split wood. But using a nail which is not big enough may not penetrate the wood properly and will not hold the pieces together. The right size is a must.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
Make sure that you are wearing the appropriate protective gear when you are working on your woodworking projects. Your safety is of primary importance. Eye protection can protect your eyes from flying wood debris. A pair of strong gloves can protect your hand from splinters. Make sure that you have these essentials before you start on any projects.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.
It’s not easy to work with wood, but the rewards are endless. It feels really good once you’re done with a project, and that is something that can last a very long time. Use the information above to help you make amazing wood pieces.