The world of woodworking ranges from creating benches to bridges and everything in between. That means there is a huge cache of knowledge out there just waiting for you to tap into it. Take your time and read this article in full to learn some new tips and tricks.
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
Always stir your stains instead of shaking. It is possible that some of the ingredients will settle as time goes on. Shaking the can may cause the contents to bubble and prevent proper mixing. Stir for at least five minutes so that everything is even.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Before using any new tool, do your research on it in full. New tools can mean serious injuries for those that use them incorrectly. Even if you’re pretty sure of how to use it, don’t risk it. Study up via the web and books related to the tool in question.
Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
When caulking using silicone caulk, mist the caulk with a small amount of rubbing alcohol. The alcohol acts as a lubricant allowing your to smoothly run your finger through the caulk for a perfect line of caulk every time. Spraying the surrounding area with alcohol also keeps the caulk from adhering to the surrounding surfaces.
Whatever you do when it comes to woodworking, it is important that you take the time necessary to learn as much as you can. Read articles written by experts, like this one, and learn from your peers. The more you know, the better your projects will end up once done.