Woodworking is a craft and a skill that has been around for centuries. It is a valuable trade to have experience with and can be infinitely useful in many ways. Skilled woodworkers can earn a good living with their hands and many enjoy woodworking just for the joy of it.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.
If you find that there is rust on any of your woodworking tools there is a rather easy solution. As long as the rust is just on surface, all you need to do is use a pumice stone on the spot. Be sure to scrub gently, as being too rough can lead to you damaging the tool itself.
If you have any pockets on the shirt you are wearing, remove everything from them before you start working with a table saw. It is very common for objects like pens and rulers to fall from your pocket and get caught in the blade, which can lead to some pretty serious injuries.
Never stick with tape measures alone. Practicing on story sticks is effective and gives you confidence to work your way to that final cut on your project piece. Cut on scrap wood initially; this allows you to try out a fitting. Having variety in the ways you can cut will stave off boredom.
Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
Build the best that you can. What this means is to not get lost in chasing perfectionism or analysis paralysis. Be honest with yourself about how good you are and cater to your strengths. Be proud of what you are able to do with woodworking, and do what you can to learn specific skills that improve on what you already have mastered.
Recycle wood when you can. You can also look for good wood to reuse from establishments that have a lot of scraps, like construction or flooring companies. You not just saving a lot of trees when you use recycled wood in your projects. You are also saving some cash.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
As you already know, woodworking is a very valuable skill. Whether you are building a big projects such as a house or smaller projects such as a small bird house, woodworking has so much to offer. Hopefully the tips from above have given you ideas on new ways to use this valuable skill.
Leave a Reply