• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Want To Learn Woodworking? These Tips Can Help!

By The Carpenter

Are you in search of a good business or hobby for you? Do you like doing things using your hands? Have you been thinking about trying woodworking? Now you’re able to! This article will give you the knowledge you need to become a master woodworker.

TIP! If you plan on staining your project, try using pre-stain conditioner on your wooden surfaces. The conditioner will make it more difficult to notice irregularities in the wood.

You can make your own reusable sanding blocks. Use your scrap pieces of 3/4″ plywood and cut as many blocks as you need for the sandpaper grits you use the most. They should be able two and a half inches by four and three-quarters inches. Use a spray glue on the blocks and the tile square. Trim the cork so that it is flush around the edges of the block. Put adhesive on the sandpaper sheet and then apply it to the cork blocks face down. Lastly, put the sandpaper flush to the cork, labeling all blocks.

Use stair gauges for crosscut guides. Attach them to a carpenter’s square, and use them to ensure that they match the rise and run of your stair jack. Mark the notches. If you put them on the same tongue of your carpenter’s square, the combination that you can make will be a great circular saw crosscut guide.

TIP! Make your own reusable sanding blocks. To do this, cut six blocks of wood from scrap plywood that is 3/4″ in diameter for each sandpaper grit.

Prepare your finishes and stains by stirring them instead of shaking them. Stir often because these stains settle over time. Shaking too much can cause bubbling to occur, and also prevent it from mixing well. Stir for at least five minutes so that everything is even.

Know how much you can spend in order to create a project. Often times your ideas are bigger than your wallet with woodworking projects. You are very excited to make something, just to realize halfway through that you don’t have enough money to finish it how you want. Do the math before you start, and you can avoid an unpleasant surprise.

TIP! Never use your hand to guide wood through a cut! Use a piece of wood to assist you in pushing the cut through. This will prevent you from loosing a finger or two, which would make working with wood very difficult.

Before sawing, ensure that the blade is in top condition. Dull blades make sawing nearly impossible. It can also cause mistakes that are costly, depending on the wood you use.

Look for recycled wood. There are a lot of places that have scraps for you to use. You may be surprised to learn that many home improvement stores or other types of businesses that use wood will simply throw out any wood they don’t use. Use this to your advantage when looking for wood for projects. This can also save you quite a bit of money in the long run.

TIP! Always be sure you’re buying the right nail in the right size for the job you’re working on. Too large of a nail can split your wood, resulting in it not holding properly.

Are you able to tell now what makes woodworking something people enjoy doing? Do you want to give it a go? Go on and try it. Use the information you just read to help your woodworking dreams become a reality. When you use this advice, you’ll begin realizing your woodworking goals.

Filed Under: Woodworking Tips Tagged With: Blog

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com