• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Want To Learn Woodworking? These Tips Can Help!

By The Carpenter

If you want to get into woodworking, then there are a few things you must learn first. Here you’ll go over a few of the tips and tricks that the professionals use when they’re working with wood. If you’re like to learn a little more about this, then continue reading.

Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.

If you enjoy doing woodworking as a hobby, try to use all the materials that you buy and throw away as little as possible. Scrap pieces of plywood or hard wood can be used as sanding blocks for future projects. You can also use scrap wood for wooden dowels in furniture making.

Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.

Do you lose drill press key chucks often? A good way to keep them within reach is to drill a hole somewhere on the drill press they fit. On top of the press is a good place, where you can see it. Drill a small hole the exact same size of the chuck’s crossbar and it will fit in perfectly.

Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.

Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.

If you mark your intended cuts with pencil lines, try not to actually cut them! You might be lined up at first, but it is possible to get a little off later in the cut, resulting in pieces that fit less that perfectly. It’s better to cut the edge of the pencil line and then sand the rest of the marking off.

Stay in contact with others. Where you work is your own space and not likely to have internet. There may be times when you get stumped on a project. Use other woodworkers as a support team to help answer your questions or even to help generate ideas. You can’t have a problem that someone else has not had.

Always wear protective glasses when using any type of saw, and ear protectors as well when you use power equipment. Chips and sawdust can destroy your vision if even a small piece flies into your eye. Woodworking is a great hobby, but it is important to stay safe while you work.

After reading through the text above it should be clear to you what you can do if woodworking is what you’re interested in. Just like everything else, you have to be sure that you stay patient. Share these tips with others, and go over them again the next time you want to work on your woodworking skills.

Filed Under: Woodworking Tips

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com