Woodworking is one of the oldest artisan crafts available to people in modern-day society. However, the slow, time-consuming craft often can feel out of place in the hustle and bustle of today’s business market–despite the high demand for beautiful, skillfully created pieces. With some time and consideration, you can make a place for your woodworking business, even in the sea of modern technologies.
If you’re using stain, test it first on a scrap of wood. Testing first will give you an idea of how the stain will look on a real piece. You’ll get no unwelcome surprises later. Wood is unpredictable at times and you should do this test so that you aren’t disappointed by the results.
When you are working with wood it is important that you take your time. Being hasty leaves you open to making plenty of mistakes. Instead of focusing on the amount of time it takes you to complete a project, do everything you can to keep your mind on the task at hand.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Before you start any woodworking project, get all of the tools you will need for the project ready. Always remember to bring a calculator and tape measure with you when you go to purchase your wood. Make sure you have any specialty tools you will need for your project available as well.
If you are trying new skills, make sure that you practice on some wood that has no value, like some scraps. You don’t want to waste an expensive piece of wood before you know exactly what you are doing. Once you have mastered your new skills, you can move to a better piece of wood.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Use a socket when drawing an arc. Most shop owners have a variety of sockets that can be used for a variety of radii. For example, if you are wanting a radius of 10 millimeters, reach into your toolbox and grab a metric socket that size. You will get a perfect arc each time using this technique.
Wear gloves when you are doing your woodworking projects. A natural part of woodworking is the risk of getting splinters and other injuries from the wood. If you find it difficult to work well with the gloves you should shop for a pair that does not hinder your performance so that you can be safe.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
Although many naysayers will tell you woodworking is a dying craft, there is no statement further from the truth. Every day, people require woodworking for construction, home improvement projects, art, and countless other uses. By taking into consideration the demand for your product and utilizing your skills effectively and efficiently, you can ensure the success of your woodworking business.