You don’t have to be a genius to work with wood. The fact is that all you need to be able to do is lift a hammer and measure accurately, along with having a good imagination. Of course, your skills need to improve, and the tips below will help you to do just that.
If you plan to stain a project, apply pre-stain products to your wood. The benefit of using a conditioner is that it will help the stain to go on evenly, ensuring the best results possible. The conditioner will let the stain apply evenly and smooth out the wood.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Are you aware that your workbench height is essential for having successful woodworking projects? In order to get the right height, measure from your floor to your waist. This is the perfect workbench height.
Check out your local library for books on woodworking. You will likely find books that contain tips, special skills or even step-by-step guides that can take you from start to finish on a project. A library can be wonderful source of information that people tend to forget when they are looking for knowledge, so do not let this resource slip your mind.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
When applying stain, work in a well-lit and well-ventilated area. When you make sure your project is under the strongest light in your work area, you more easily spot drips, runs and any spots you missed. Ventilation is also important to protect your health, and even on small projects, strong fumes can affect you by making you feel sick or giving you a headache.
Look around for free wood in your area. A lot of businesses don’t need to use their pallets anymore, and might let you take them if you’ve got a means to do so. Look online and you can find a million uses for old wooden pallets. Some people make furniture out of them. Be thrifty.
Learn the basics of sharpening whatever woodworking tools you use personally. Start any work session with cleaning and preventative maintenance. The few moments you put into honing your tools each day will spare you tenfold that time in sanding and repairs. You are also ensuring your personal safety here as well.
Knocking a few beers back during down time can be a lot of fun. This is not a good idea and can impair your judgement. Never mix alcohol and this craft. The same should go for illegal drugs or prescription ones.
Once you master the basics of woodworking, these tips can help you get to the next level of skill. That will open you up to new projects you never thought you would be able to accomplish. The more you practice, the better you will become, so continue to enjoy this hobby as often as possible.