Either you want to make things for sale or you just want to work with wood for the entertainment value. Your reasons do not matter. Woodworking is not terribly difficult, but it does take some know-how. The article below is a compilation of expert information and tips that you can put into practice immediately.
Be realistic about your budget. Keep in mind that complicated projects are often the most expensive ones. You’re excited to make an item, only to find half way through that the money just isn’t there to complete it the way you want. Plan ahead and avoid surprises.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Before sawing, ensure that the blade is in top condition. Dull blades make work harder, plus they are a safety hazard, especially on power saws. Dull blades can also cause costly errors due to damage to your wood.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you will have a little bit of extra wood to cut off or utilize to make up for the difference.
One thing to keep in mind with woodwork is always crowning your wood. This is done by looking down the edge of your lumber and finding the high side. Always put the high side up, which will create a more uniform and more supportive floor and roof line for your home.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
Stain only provides color to wood, not finish. You will need to apply a finish coat on top of the stained wood. If you are in a hurry, or short on time, you can use a product that combines both stain and finish together. Be sure to use a higher-quality brush for this, and stain in the direction of the grain.
Now that you now more about woodworking, you are ready to get started. Use what you’ve just learned, and you will do quite well. Enjoy the process as you improve your skills and make wonderful creations. You are about to find out just how much of a joy woodworking really is!