If you want to get into woodworking, then there are a few things you must learn first. Here you’ll go over a few of the tips and tricks that the professionals use when they’re working with wood. If you’re like to learn a little more about this, then continue reading.
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
Prior to applying glue, attempt a dry fitting. If you try to adjust things after the glue has been applied, there is a huge chance that you will end up causing some damage. Dry fitting helps you figure out where each piece is placed.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
If you are working with wood, it can be very dangerous to have a messy workshop. Do everything you can to keep your work area clean and well-maintained. Every time you are done with a specific tool, out it away before you get another. It may seem like this is time consuming, but you won’t have any reason to clean up later.
If you are going to be doing a big woodworking project on the outside of your home, check to make sure it is within the rules. Your local government may have zoning regulations or even a permit process needed for structures like garages, decks and even storage sheds. Also check with your neighborhood association if there is one.
Always keep your work area clean and safe, even when you are not actually there. Leaving out pieces of lumber with nails in them or even power tools that are easily activated in your yard can be dangerous. You never know when animals or even neighborhood children might come romping through and hurt themselves.
Do you hate those bubbles that form when applying joint compound to your drywall? There is a simple trick that professional drywallers use to avoid this annoying problem. Add two or three drops of dish detergent to your joint compound and you will be rewarded with bubble free joint compound.
After reading through the text above it should be clear to you what you can do if woodworking is what you’re interested in. Just like everything else, you have to be sure that you stay patient. Share these tips with others, and go over them again the next time you want to work on your woodworking skills.
Leave a Reply