Woodworking is both a valuable trade and an artistic skill. There are many facets to woodworking which is why it is so enjoyable. many people enjoy working with their hands and creating beautiful items. others enjoy making functional items which can be used on a daily basis. Whatever your interest in woodworking is, here are some tips to help you along the way.
Do you know how much your workbench height affects your work? In order to attain the perfect workbench height, first measure how far it is from the middle of your waist to the floor. This tells you the right workbench height for your needs.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
Check out your local library for books on woodworking. You will likely find books that contain tips, special skills or even step-by-step guides that can take you from start to finish on a project. A library can be wonderful source of information that people tend to forget when they are looking for knowledge, so do not let this resource slip your mind.
Glue can cause nasty stains on your finished work. You can eliminate stains easily using a piece of tape. First, clamp your wood together without any glue. Put a piece of tape over the joint. Cut the tape on the joint with a sharp knife. You can now clamp the wood together with glue and any excess will ooze onto the tape, not the wood.
Do you lose drill press key chucks often? A good way to keep them within reach is to drill a hole somewhere on the drill press they fit. On top of the press is a good place, where you can see it. Drill a small hole the exact same size of the chuck’s crossbar and it will fit in perfectly.
If you are going to be doing a big woodworking project on the outside of your home, check to make sure it is within the rules. Your local government may have zoning regulations or even a permit process needed for structures like garages, decks and even storage sheds. Also check with your neighborhood association if there is one.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
Hopefully, this article has inspired you with new ideas to further your woodworking creativity. Woodworking has so much to offer for the craftsman who enjoys working with his hands and creating beautiful and useful items. use the tips from above to add some new creativity to your works of arts and enjoy woodworking even more.