Woodworking can be a fascinating hobby. The beautiful things you can create are endless. Whether you prefer to make decorative items or item that are functional, woodworking offers something for everyone. If you are looking to get into woodworking then here are some tips to get you started in the world of woodworking.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Do not use fingers as guides when you cut narrow wood. Use a strip of wood instead to maximize safety. This makes sure that you won’t chop off a finger.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
If you are working on your projects in your garage, keep your garage door open. You will be created a lot of wood dust. An open garage door allows your work area to be properly ventilated. Also, during the day, you work area will be better lighted with the garage door opened.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
As you can see, woodworking offers something for anyone who is interested in getting into the world of crating hand crafted items. The possibilities are endless. You can make things as simple as a small birdhouse or an elaborate dollhouse. All it takes is some wood, a few tools and creativity.