When you are looking for a new hobby, look no further than woodworking. This amazing pastime combines skill building with the creation of items you can actually use around your home. If you want a hobby that allows you to do something good, the tips below will help you join in.
When trying woodworking for the first time, opt for cheaper woods or even scrap woods. You are going to make mistakes along the way when you are first starting. Make sure you make those mistakes on wood that’s easily replaceable. There’s nothing worse than making a rookie mistake on a very expensive piece.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Always be on the lookout for good woodworking tips. If you meet professionals, ask them for their best tips. If you find a magazine chock full with tips, pick it up so that you can keep it in your archive. Even record TV shows that have woodworking in them to glean any tips you my find there.
If you have interior doors that are starting to come loose, you can easily remedy this problem with golf tee. Take the door from the frame than then tap in the tee into the screw holes. Trim the golf tee until it is flush with the surface, and then reinstall the door. The screw will be able to bite into the golf tee.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
If you mark your intended cuts with pencil lines, try not to actually cut them! You might be lined up at first, but it is possible to get a little off later in the cut, resulting in pieces that fit less that perfectly. It’s better to cut the edge of the pencil line and then sand the rest of the marking off.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
Learn the basics of sharpening whatever woodworking tools you use personally. Start any work session with cleaning and preventative maintenance. The few moments you put into honing your tools each day will spare you tenfold that time in sanding and repairs. You are also ensuring your personal safety here as well.
These ideas aren’t all new, yet they’re all worth reading. Those which are new to you will serve to better your techniques. Those which are old hat are reminders that you should continually pay attention to how you are working with wood. Together, they will build you into a master wood craftsman.