If you find that you are good with work that involves your hands, consider giving woodworking a try. From measuring to cutting to piecing things together, it is a fun way to spend your time. The tips below will help you get started on the right foot, ensuring your first project is a great one.
Use stair gauges to guide your crosscuts. Clamp them on the carpenter’s square and be sure they match up. Mark the notches in them. When you clamp them on the one tongue of the carpenter’s square it will become a good crosscut guide for your circular saw.
Dry fit your wood before using glue. If you attempt to readjust the pieces once glued together, you risk damage to your project. A dry fit is going to help you figure out what goes where.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
When you are new at woodworking and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.
Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.
Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.
If you are good with your hands, woodworking is the activity for you. Take your time to absorb the knowledge you have gained here and you’ll find that entering the world of working with wood becomes easier. In the end, you’ll find success with your projects and a new hobby to enjoy.