You might be one of those people who thought they weren’t good with their hands. However, if you take the time to give it a try, woodworking can show you how magical your hands can be. With just the right tips, outlined below, you’re going to be able to make all kinds of pieces. Keep reading!
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Glue can cause nasty stains on your finished work. You can eliminate stains easily using a piece of tape. First, clamp your wood together without any glue. Put a piece of tape over the joint. Cut the tape on the joint with a sharp knife. You can now clamp the wood together with glue and any excess will ooze onto the tape, not the wood.
If you have any pockets on the shirt you are wearing, remove everything from them before you start working with a table saw. It is very common for objects like pens and rulers to fall from your pocket and get caught in the blade, which can lead to some pretty serious injuries.
Do you have a hard to reach screw that needs tightened, but there isn’t room for your hand and the screwdriver? Your toolbox may hold the answer! Use your 12 point socket with your long handle screwdriver. Put the socket over the handle of the screwdriver, then use the ratchet to reach tough spots.
Wear gloves when you are doing your woodworking projects. A natural part of woodworking is the risk of getting splinters and other injuries from the wood. If you find it difficult to work well with the gloves you should shop for a pair that does not hinder your performance so that you can be safe.
Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.
You may think that you can’t be an expert at woodworking, but if you stay interested and learn as much as you can, your expert status is all but guaranteed. Just take it slowly and use everything you have learned here to make great-looking wood pieces that you can show off to everyone. Good luck!
Leave a Reply