Woodworking can be a fascinating hobby or it can be a lucrative career. Whether you would like to do it for a living or would simply like to pursue it as a weekend hobby, this article is for you. Use these tips to help inspire you to become a better woodworker of this fascinating art.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Ask local hardware stores if they sponsor woodworking classes. You may be surprised by what you find! In fact, your local Home Depot or Lowes might have classes available monthly that’ll help you hone your skills. This is a quick way to grow as a woodworker with very little out of pocket costs.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.
Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.
Make sure the lighting is sufficient in your work area. Woodworking requires a degree of accuracy. In addition, you will be using sharp tools with which to cut pieces of wood. Working with wood requires good lighting so you do the job right and stay safe.
When you are applying a finish to your completed project, make sure you work in a dust free environment. It is important to sand the wood of your project before applying varnish or paint, and sand it between coats with fine sandpaper. Use extremely fine steel wool before applying the final coat of finish.
There is much to learn about woodworking but luckily it is an enjoyable skill to learn about. Many people find it to be a relaxing hobby while other pursue it as a full time passion. use the tips from above to enhance your love of woodworking and to help you enjoy it even more.
Leave a Reply