Woodworking can be a great hobby for people from all walks of life. Whether you are an expert, or are just getting started, there is always something new for you to learn about the woodworking skill. If you like to learn more about this hobby you should read the article that follows below for some great advice.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
When trying woodworking for the first time, opt for cheaper woods or even scrap woods. You are going to make mistakes along the way when you are first starting. Make sure you make those mistakes on wood that’s easily replaceable. There’s nothing worse than making a rookie mistake on a very expensive piece.
Avoid using your fingers as guides while cutting narrow pieces of wood. The smart thing to do is to use another wood piece to push your wood up to the saw. This will help ensure you keep all of your fingers, making woodworking much easier.
If you are trying new skills, make sure that you practice on some wood that has no value, like some scraps. You don’t want to waste an expensive piece of wood before you know exactly what you are doing. Once you have mastered your new skills, you can move to a better piece of wood.
You need to do dry fittings prior to applying glue and clamping your woodworking project together. If you attempt to readjust the pieces once glued together, you risk damage to your project. Dry fitting your pieces will show you how the components fit together.
Your woodworking shop needs a stair gauge. They are typically used to put down stair jacks, although they can function as a clamp for a carpenter’s square. That means your square becomes a circular saw guide. You can always make perfectly straight cuts by using this method.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
Give yourself ample time for a woodworking project. A project may look simple on paper, but in reality it can be multiple hours or even multiple days. Plan ahead to make sure that you are set in terms of the necessary time. If a project stretches on for weeks because of poor planning, it may end up never getting done.
Fumes from oil-based stains can be harmful to animals, as well as humans. To avoid fumes, try using a water-based stain. Water-based stain comes in a wide variety of colors, even more than their oil-based counterparts. And the application process is the same whether you are using oil, or water-based stain.
As you read at the beginning of this article, there is so much that you can learn about woodworking that you will never know everything. However, even though that is a fact, there is no reason to not try. Now that you read this article you know a little more, and continuing to learn will only lead you to being a better woodworker.