You probably don’t consider yourself a woodworker, or maybe just not a good one. But imagine what you could do if you were. Could you help build structures and buildings? Would you be able to make artistic pieces? Could you restore furniture? If any of these possibilities interest you, keep reading for knowledge you need on woodworking.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Before you start any woodworking project, get all of the tools you will need for the project ready. Always remember to bring a calculator and tape measure with you when you go to purchase your wood. Make sure you have any specialty tools you will need for your project available as well.
If you have loose interior door hinges to work on, you may be able to just use a golf tee to help. Take the door off and remove the hinges, then lightly tap the golf tee into the screw holes. Trim the golf tee to fit the hole, then put back the door. A golf gee thus provides the screw with something it can grab.
If you are working with wood, it can be very dangerous to have a messy workshop. Do everything you can to keep your work area clean and well-maintained. Every time you are done with a specific tool, out it away before you get another. It may seem like this is time consuming, but you won’t have any reason to clean up later.
Use a socket when drawing an arc. Most shop owners have a variety of sockets that can be used for a variety of radii. For example, if you are wanting a radius of 10 millimeters, reach into your toolbox and grab a metric socket that size. You will get a perfect arc each time using this technique.
Do you currently have a screw that needs some tightening but is not easy to reach? Your toolbox has the answer. Just grab a 12-point socket set. Put the socket over the handle of the screwdriver, then use the ratchet to reach tough spots.
If dust and dirt get into the holes of a brad or nail gun while they are not in use, this can cause them to wear out more quickly. It is a good idea to plug the air inlet holes up with something to prevent anything from getting in there.
Organize your woodworking space. There are few things more irritating than looking for a tool when you need it, and not making any headway in the process. Missing and misplaced tools can lead to major project delays. Keeping organized is a big help. In fact, pulling out the tools that you’ll need before a project is a smart thing to do.
When you have skill in woodworking, you have the power to take a raw natural resource and make things with it. Use the tips, tricks and techniques to make your life a more enjoyable one. Build that deck you want behind the house, or restore an old piece of furniture, either for yourself or for profit.
Leave a Reply