It is very exciting getting into the art of woodworking. However, with it being such a large field, many people can feel a little uneasy trying to start out. Don’t let this happen to you. Instead, embrace the following tips, and get started today putting your skills to work with some wood.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
Use some affordable filters for collecting fine dust. The filters and micro-filtering bags made to catch this dust can get pricy after several replacements. Try using the ones that are sold for use in household vacuums.
You can buy the cheap ones and easily modify them to fit your shop vacuum. Cut off the top a bit past the small opening. Turn the whole thing inside out so that airflow still flows in the usual direction. Slip it over your foam filter using the retaining ring to keep it in place.
Is there a loose screw which you just can’t get at? Look in your toolbox. Grab a screwdriver with a long handle and a socket that’s a 12 point. Place the socket on the screwdriver and place it atop a ratchet.
Do not forget the important of keeping in touch with the world. You may be able to access the Internet in your personal woodworking shop. There will be times when a project flummoxes you. The best thing to do is have contact information for others that enjoy woodworking and have more skills than you. You can’t have a problem that someone else has not had.
Woodworking is a craft enjoyed by young and old alike and has been treasured for centuries. In order to get the most out of it, you must be working towards honing your skills. So, use the tips that have been discussed to help you get going in the right direction today.