• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Starting Your Own Woodworking Business At Home

By The Carpenter

If you are great with your hands, woodworking may be of great interest to you. Woodworking, or creating gorgeous items with wood, has been done for centuries. This article will give you ideas on how to get better at woodworking.

Try using a stair gauge as a crosscut guide. Just clamp them on your carpenter’s square while making sure they match up. From there, make note of the notches. When you clamp them on the one tongue of the carpenter’s square it will become a good crosscut guide for your circular saw.

TIP! When creating crosscut guides, use a stair gauge. Clamp them to the carpenter’s square, then ensure that they match up with the jack’s run and rise.

Never stain an entire piece of wood without testing a little part of it first. This can prevent surprises if the shade of the stain is different after it has been applied. Keep in mind that it is not easy to guess how wood stain will turn out; therefore, you should always test out the stain on a piece of wood to prevent disappointment.

When creating crosscut guides, use a stair gauge. All you need to do is affix them to a square and then affirm that it is set as you would like the angles to be. Mark the notches in them. If you do it properly, you will have an excellent crosscut guide.

Be sure you have some kind of an idea of what you can budget your money on. Your eyes can get bigger than the amount of money you want to spend very quickly when it comes to woodworking projects. You are very excited to make something, just to realize halfway through that you don’t have enough money to finish it how you want. Do the math before you start, and you can avoid an unpleasant surprise.

TIP! Understand your budget’s limitations. You don’t want to start on a project and then realize you don’t have the money to finish.

It is always best to stir your stains and finishes, as opposed to shaking them. Some of the ingredients in these stains and finishes tend to settle to the bottom over time. But, if you shake it could cause bubbles to form which would mean it wouldn’t mix too well. Stir thoroughly until it is smooth and even.

Use the right wood for your project. Different types of wood handle stress in differing degrees. Always research the type of wood you want to work with before you get started on your new project.

As you work through your budget, make note of any tools that will be necessary for the tasks you have in mind. It isn’t hard to overlook tools when you are concerned about the cost of wood and accessories for your project. Tools can be expensive so you should definitely remember to count them.

Gel Stains

Gel stains are the new big thing for staining furniture and other wood projects that need staining. Liquid stains tend to run when they are applied, while gel stains stick to the lumber better. Not only that, but gel stains tend to be thicker than liquid, so that the pigment is consistent, which makes for a more even stain on vertical and horizontal pieces.

Whenever you’re thinking of cutting a piece of wood that’s narrow, don’t try to use your fingers to guide it. It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade. This will ensure that you keep all ten of your fingers, which are all necessary for you to continue working with wood.

TIP! Don’t use your fingers to guide your cutting. Instead, push the pieces through your saw with a long strip of wood.

If you plan on renting an unfamiliar tool, ask the company if they can provide a short tutorial. A specialist can quickly teach you what you should know about the tool. Some places even have detailed handouts with tips that will help you get better results with the new tools you are using.

Tin Snips

You can use a golf tee to help tighten up the hinges of an interior door. Take the door off its hinges, then remove the hinges themselves, then tap the tee into the screw hole. Cut the extra golf tee off and install the door again. The golf tee gives the screw something to bite into.

TIP! A golf tee provides a quick and easy fix for loose interior door hinges. Remove hinges and door from door frame and lightly tap one golf tee inside each of the screw holes.

Tin snips are important accessories to use when you are woodworking. They let you rapidly cut the piece into shape. If you get some tin snips just for cutting laminate, they will stay sharper.

Each shop needs a stair gauge. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. This will turn your square in to a circular saw guide. Every cut you make will be straight when you use the square to guide you.

Be sure you have a good blade before sawing. A blade that’s dull will make it very hard to use your saw correctly. On a non-power saw, a dull blade can make exact cuts hard to pull off. This can cost money if the piece is cut too short.

TIP! Always check blade conditions before you saw. A blade that’s dull will make it very hard to use your saw correctly.

Choose correctly-sized nails. Very large nails can cause wood to split, which will prevent it from holding well. Nails that are too small won’t hold the pieces together. Always try to pick the right size nail for your job.

Be sure to use appropriate protection for your ears. A wood shop can be extremely noisy. Hearing loss could be a result if you are exposed to it for too long. Headphones or throw away ear plugs are both good protection options. Whatever choice you make, be sure that they are always worn inside the shop.

Be certain you use the right nail size for any project. Very large nails can cause the wood to split, which will prevent it from holding well. Also, if you have a nail that isn’t big enough it’s nothing going to hold the wood right or penetrate it. You should know what size you need to get the job done.

TIP! Make sure to use the right nails. If a nail is too thick it can split the wood, and this will stop it from holding properly.

Woodworking is a great way to work using your hands. Now that you know more about woodworking, you’re ready to make your own pieces out of wood. Use what you’ve gone over here and your skills should be vastly improved. You may even now be an expert!

Filed Under: Woodworking Tips Tagged With: gel stains, stains tend, stair gauge

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com