The craft of woodworking can be applied to several end products. These include wood furniture, interior finishes such as built-in bookshelves and banisters and kitchen or bathroom cabinets. Most cabinets are built in an off-site cabinet shop and then the finished product is installed in the home by the builder.
A great tool for setting crosscut guides is a stair gauge. Fix them onto the carpenter’s square, taking care to note that they are a good fit for the stair jack. Then use a pencil to mark the notches. If you place them on the tongue you’re using for your carpenter square, that combo is a good crosscut guide for your circular saw.
When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you will have a little bit of extra wood to cut off or utilize to make up for the difference.
Recycle wood when you can. You can also look for good wood to reuse from establishments that have a lot of scraps, like construction or flooring companies. You not just saving a lot of trees when you use recycled wood in your projects. You are also saving some cash.
When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
If you are making something from a set of plans, read through the plans before you begin. You need to make sure that you understand every step so there will be no surprises. Knowing what step comes next can help you plan out the current step. This will help you be more prepared in your projects.
Cabinet making is a trade that requires great skill to produce beautifully detailed work. Most cabinet makers begin as an apprentice in an established shop to learn the basics of the trade. If you are someone who loves to work with wood and appreciate its beauty, this article can help you get started in the business.
Leave a Reply