The craft of woodworking can be applied to several end products. These include wood furniture, interior finishes such as built-in bookshelves and banisters and kitchen or bathroom cabinets. Most cabinets are built in an off-site cabinet shop and then the finished product is installed in the home by the builder.
Woodworking can be a fun, and satisfying, hobby. However, it is very important to play it safe when working with tools, substances that cause fumes and other common dangers of the craft. Be sure to wear safety glasses, allow plenty of fresh air for ventilation when using oil-based products and always read the directions before you start anything!
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Before you start any woodworking project, get all of the tools you will need for the project ready. Always remember to bring a calculator and tape measure with you when you go to purchase your wood. Make sure you have any specialty tools you will need for your project available as well.
Having a beer while enjoying your hobby might seem like a good idea. This is not a good idea and can impair your judgement. You should never drink while using woodworking equipment. Common sense also says to stay away from using any drugs, prescription or otherwise, for the same reasons.
Build the best that you can. What this means is to not get lost in chasing perfectionism or analysis paralysis. Be honest with yourself about how good you are and cater to your strengths. Be proud of what you are able to do with woodworking, and do what you can to learn specific skills that improve on what you already have mastered.
There are some basic tools needed for woodworking projects. These include a saw, hammer, files, level, square and measuring tapes. Larger pieces of equipment you may need are different types of electrical powered saws and sanders. The power tools can be quite expensive, and you may not need them unless you do a lot of woodworking projects.
Make sure there are no spots of glue on the wood before proceeding to finish your project. The spots will show up as lighter spots after the finish has been applied. You can use mineral spirits of naptha to completely remove all traces of glue from the wood. You may also be able to remove the glue by sanding the wood.
Cabinet making is a trade that requires great skill to produce beautifully detailed work. Most cabinet makers begin as an apprentice in an established shop to learn the basics of the trade. If you are someone who loves to work with wood and appreciate its beauty, this article can help you get started in the business.
Leave a Reply