• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Simple Tips To Help You Understand Woodworking

By The Carpenter

Don’t be afraid of woodworking because it seems hard to you. Anybody armed with sufficient know-how can do woodworking. All you need is some knowledge, patience and practice. This article provides you with some of the things you should know if you want to try woodworking.

Are you aware that your workbench height is important to your work quality? Measure where your waist is from the floor. This will give you the optimum height for a perfect workbench.

When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.

Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.

If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.

When you are cutting narrow pieces of wood, never use your fingers to guide them. Instead you should use a thin and long strip of wood get push it through your saw. This will assure you keep your fingers.

If you have your own table saw, you will eventually have to crosscut some wood. This can bring your fingers very close to the saw guard and blade. If the saw kicks back, you could be headed to the hospital. It is best to cut a block of wood to push the wood through the saw with.

Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.

Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.

If you plan on applying any gloss or stain to a piece of wood, it is very important that you sand it down first. Failing to do this step will result in a wood surface that is not very smooth. Use sandpaper to smooth things down then make sure all dust s removed by brushing it with a cloth.

Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.

Now you know much more when it comes to woodworking. Put these tips to use to get better with woodworking. You can master the craft if you keep your mind open to learning new things. Take what you’ve learned here to heart, and you cannot go wrong. Now get going and have some fun!

Filed Under: Woodworking Tips

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com