Woodworking is a skill that has been valued since the beginning of time. Many woodworkers enjoy it from an artistic point of view while others enjoy creating larger, more functional items. But whatever it is that you enjoy about woodworking, here are some tips to help you enjoy it even more.
Take care when using power tools. If you are new to woodworking, be very careful when you are operating power tools for the first time. Read the manual thoroughly, and if possible, have someone with experience demonstrate how to use it properly. This will ensure that you don’t have a nasty accident during your woodworking project.
Always put your safety first when it comes to using tools, stains and paints. The more variety you use, the more specifics there are about applications, tool use, times for drying, and more. Put your safety first by reading the instructions, wearing any necessary protective gear, and working in areas with good ventilation whenever using oil-based products or anything that produces air pollutants.
When you install your hacksaw blade, make sure the teeth face forward. They are designed to cut when pushed using a forward stroke instead of a pulled stroke. Some of these blades have arrows pointing toward the handles that show the correct way to install them. Install it making sure it is tight and cannot bend. When you do lots of cutting, your blade heats up and expands, so make sure you tighten it before it begins bending.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16′ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2’³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
As you already know, woodworking can be a very useful and creative hobby. There is a lot of creativity and enjoyment that goes into creating items of wood. Hopefully the tips from above will enhance your woodworking efforts and inspire you to make even more works of art to enjoy.