• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

My Woodworking Site

woodworking tips & tricks


  • Home
  • Woodworking 101
  • Woodworking Tips
  • Legal Pages
    • Privacy Policy
    • Terms of Use
  • Contact

Simple Tips And Tricks About Working With Wood

By The Carpenter

Woodworking is a skill that is learned. You can become good at woodworking with the right training. The way you improve is with education and practice. Apply all of the advice you learn. Keep reading if you’d like to know more on the subject of woodworking.

Before you commit stain to wood, it is usually a good idea to test out the stain in an unseen area of the wood first. This can prevent surprises if the shade of the stain is different after it has been applied. It is important to avoid mistakes to save time and money.

TIP! Test out stains on a hidden spot. This lets you stay away from any sudden surprises when the stain color is not what you expected.

If you will be using stain, always do a test on an inconspicuous area, or scrap of wood. This will help you to pick the right stain color for your project. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.

Make sure you have a good idea of what your budget can really make. When it comes to woodworking, it is easy to get lost in the project without a grasp on reality. You’re excited to make an item, only to find half way through that the money just isn’t there to complete it the way you want. Do your homework before you start to avoid surprises.

For crosscut guides use a stair gauge. Make sure that they are clamped next to the carpenter’s square when you cut. Then use a pencil to mark the notches. When you combine them on your carpenter’s square’s tongue, they’ll guide your crosscuts for you.

Gel Stains

Gel stains are great for staining furniture pieces. Stains that are liquid will run when you apply them and the gel stains are going to stick to your wood better. Not only that, but gel stains tend to be thicker than liquid, so that the pigment is consistent, which makes for a more even stain on vertical and horizontal pieces.

When budgeting for a project, do not forget to include the cost of any new tools you will need to acquire to finish it. It is easy to forget about tools when you are thinking of how much wood you require. Some of the necessary items may be very costly, so plan your budget carefully.

TIP! Account for new tools in your budget. This is something often overlooked.

When you want to cut narrower sections of wood, never use your own fingers to guide them. Instead, use a piece of scrap wood to safely push the lumber through your table saw. This will help to keep you from cutting off your fingers, which would be a travesty.

Tin snips are important accessories to use when you are woodworking. This tool is intended to cut metal, so it easily slices through laminates, which greatly reduces the energy needed. Getting a set of tin snips you’ll only use for laminate will keep your snips sharp.

Gel stains are great for furniture. Liquid stains tend to run when they are applied, while gel stains stick to the lumber better. Gel will also have a more consistent pigment upon application.

TIP! Gel stains are great for staining furniture. Liquid stains have a tendency to run but gel stains will stay in place better, without running.

Make certain to have the right nails for your specific project. If you get something too big, the wood may break and not be very secure. However, very small nails don’t penetrate the wood enough, also causing it not to hold well. Make sure you understand what size nail is correct.

Avoid being a perfectionist with tape measures. You are sure to find how useful story sticks are. You can always also just work into a cut gradually. Cut on scrap wood initially; this allows you to try out a fitting. When you plan your cuts properly, you’ll do a better job.

Use tin snips if you are working with laminate. These make cutting laminate much easier. Using tin snips only to cut laminate will ensure they stay sharp.

TIP! Use tin snips if you are working with laminate. Tin snips allow you to quickly and effortless cut the laminate into a usable size.

Consider shopping at garage sales for woodworking equipment. Buying used can help you save a lot of money. You will save a lot of cash when you buy new tools buy looking for used tools first.

There are several important hand tools you need before starting a woodworking project for the first time. The first tool to get is a hammer. A great hammer that you should use with woodworking will be a claw hammer. Try them out in the store and pick one that feels comfortable in your hand. You don’t want it to be too heavy.

Find wood which is recycled. There are a lot of places that will have scraps that they were going to throw away that you can use. Flooring stores and home improvement outlets tend to throw out wood they don’t use. Use this to your advantage and see if they have something you can use for your project. This also saves quite a bit of money.

TIP! Use recycled wood when available. There are many places that work with wood that often discard scraps which can be useful.

With the right information, woodworking can be practiced and learned by almost anyone. It is important to understand the fundamentals of the trade. You’ll eventually become a master woodworker by using the tips you just learned.

Filed Under: Woodworking Tips Tagged With: gel stains, scrap wood, tin snips

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Categories

  • Woodworking 101
  • Woodworking Tips

Featured Posts

Beginners: Essential Fundamentals to Woodworking

Always Place Safety First in Any Woodworking Tasks

Key Health Concerns To Keep In Mind When Woodworking

Differences Between Hardwoods and Softwoods

Common Misconceptions in Woodworking

Popular Tags

1/2 inches applying glue bird feeder Blog carpenter square crosscut guide cutting laminate drafting square dry fit dry fitting dull blade dull blades extension cord extra spring gel stains golf tee grade indicates grade refers grade wood particle board perfect height power sander power tools safety equipment sanding block sanding blocks scrap plywood scrap wood screw holes size nail spray adhesive stair gauge stair gauges stair jacks tain conditioner tile square tin snips utility knife wood shop woodworking business woodworking project woodworking projects woodworking shop woodworking skills workbench height

Copyright © 2021 ยท mywoodworkingsite.com