Are you talented in working with your hands? Do you love the beauty of wood crafts and furniture? If so, you may be able to make a living working at making beautiful items from wood. Use the information provided in this article to decide if woodworking could be the best career choice for you.
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
Use a pre-stain wood conditioner before staining the wood. Using a pre-conditioner will help you avoid blotches when staining. The conditioner will let the stain apply evenly and smooth out the wood.
Your workbench’s height is important in woodworking. Measure where your waist is from the floor. This tells you the right workbench height for your needs.
Even if you have been doing woodworking for some time you may want to consider taking a class. There are different levels of classes available, so you should be able to find one that teaches you something and is challenging. There is never too much that you can know about woodworking.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2′ to 3′, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When trying woodworking for the first time, opt for cheaper woods or even scrap woods. You are going to make mistakes along the way when you are first starting. Make sure you make those mistakes on wood that’s easily replaceable. There’s nothing worse than making a rookie mistake on a very expensive piece.
Always use the safety equiptment that came with any of your woodworking tools. You may feel that a sheild is getting in your way when you are sawing, but its purpose is to protect you from serious injury. If you feel tempted just think of what it would be like to lose a finger or worse.
Get to know the general properties of any wood you are buying, especially if you want to stain it later. Low quality wood is considered ‘paint grade’ and isn’t meant to be stained. Veener and particleboard are different too; particleboard may absorb too much stain, and veener may not absorb enough. The proper type of wood will ensure that your project will turn out as planned.
Keep a ruler inside your pocket, and make sure it stays put. Purchase a metal ruler to carry along with a small telescoping magnet that is used to grab loose screws or nails. The magnet will keep the ruler in place.
Furniture and craft items made with solid wood, and finished to perfection are worth a lot. This is because the quality is so much better than items produced in a factory. With all the information in this article, you should be able to decide if working with wood is the best path for you.
Leave a Reply