When I was a child, my grandfather had a workshop in his basement. He would supply us with wood, tools and hardware and we would create a myriad of imaginative crafts. If you have grown up with a love of woodwork, the tips below will help you master your craft.
When you install your hacksaw blade, make sure the teeth face forward. They are designed to cut when pushed using a forward stroke instead of a pulled stroke. Some of these blades have arrows pointing toward the handles that show the correct way to install them. Install it making sure it is tight and cannot bend. When you do lots of cutting, your blade heats up and expands, so make sure you tighten it before it begins bending.
Ask local hardware stores if they sponsor woodworking classes. You may be surprised by what you find! In fact, your local Home Depot or Lowes might have classes available monthly that’ll help you hone your skills. This is a quick way to grow as a woodworker with very little out of pocket costs.
Use tin snips to trim laminate for your projects. Tin snips are a great way to cut or trim the laminate into the size you want. Buying tin snips meant to be used just for this purpose can keep them at the desired sharpness.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Each shop needs a stair gauge. These gauges are used to lay out stair jacks but they are also very useful if you need something to clamp a carpenter’s square. This adds a very practical element to your project that can save time and money. Also, it will improve the quality of each cut.
If there is a joint in your work that does not fit together properly, this cannot be fixed with glue. While it may seem like the simple way to fix things, it will only work temporarily. The best thing to do would be to start over and be more careful the next time.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
Do you lose drill press key chucks often? A good way to keep them within reach is to drill a hole somewhere on the drill press they fit. On top of the press is a good place, where you can see it. Drill a small hole the exact same size of the chuck’s crossbar and it will fit in perfectly.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
If you can take your love of working with wood and pass it on to your kids, you will imbue them with skills that last a lifetime. Use these tips to give them the right advice when it comes to completing their projects. That will ensure that they are able to keep this hobby going well into adulthood.
Leave a Reply