If you have any unique, hand-made furniture, you know how beautiful woodwork can be. When you’d like to tackle such a project for yourself, you need to have the right knowledge in place to be able to find success. This article provides you with some tried and tested tricks for your next project.
One good product to use if you are staining your project is a conditioner, to be used before staining. Using a pre-conditioner will help you avoid blotches when staining. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.
Take care when using power tools. If you are new to woodworking, be very careful when you are operating power tools for the first time. Read the manual thoroughly, and if possible, have someone with experience demonstrate how to use it properly. This will ensure that you don’t have a nasty accident during your woodworking project.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
Dry fit your wood before using glue. If you try adjusting things post-gluing, there’s a big chance that you’ll damage something. Dry-fit will help you realize what goes where.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Know all about the wood you are getting prior to purchasing it, especially if you plan to stain it. Wood that is paint grade is not high quality. On the other hand, wood that is stain grade will stain better. Along the same lines, veneer is very different from particleboard because the former will not necessarily absorb stain properly; however, the latter typically absorbs too much stain. Getting the right wood helps ensure your project turns out the way you expect.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
You can make using spring grips easier. Using a spring clamp can come in very handy, but using them with one hand can be a challenge. These clamps can be difficult to open without the use of both hands. There are ways to make this more simple. Before you start to glue, put your clamps on some scrap wood while you have two free hands. This makes it possible to use them with only one hand when you need to.
Make sure that you are wearing the appropriate protective gear when you are working on your woodworking projects. Your safety is of primary importance. Eye protection can protect your eyes from flying wood debris. A pair of strong gloves can protect your hand from splinters. Make sure that you have these essentials before you start on any projects.
As you plan out your next project, you can use these tips to master your technique. Each has been written to ensure you can easily integrate them into your technique. As long as you make use of them, you will find the time you spent reading this article was worth it.