Woodworking can be a fascinating hobby or it can be a lucrative career. Whether you would like to do it for a living or would simply like to pursue it as a weekend hobby, this article is for you. Use these tips to help inspire you to become a better woodworker of this fascinating art.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
For a beginner, sometimes it is best to buy kits instead of cutting the entire project yourself. You should be able to finish your project quicker with a precut kit. These kits will help you gain some valuable insight on the steps involved in a project so that the next time you can do it all yourself.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.
Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.
If you are new to woodworking, start small. Although you may be tempted to dive in to a difficult project, it is best to start small and slowly build your skills. Consider building a birdhouse or a shelf to help you learn your way around your woodworking shop and tools.
There is much to learn about woodworking but luckily it is an enjoyable skill to learn about. Many people find it to be a relaxing hobby while other pursue it as a full time passion. use the tips from above to enhance your love of woodworking and to help you enjoy it even more.