You probably don’t consider yourself a woodworker, or maybe just not a good one. But imagine what you could do if you were. Could you help build structures and buildings? Would you be able to make artistic pieces? Could you restore furniture? If any of these possibilities interest you, keep reading for knowledge you need on woodworking.
Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.
Keep all of your woodworking tools in a safe and dry place. You want to be sure that your tools are not in reach of children, as well as that they will be safe from moisture and other elements that can cause them to degrade at high rate. Follow this rule and your tools will last a long time.
Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
If you enjoy doing woodworking as a hobby, try to use all the materials that you buy and throw away as little as possible. Scrap pieces of plywood or hard wood can be used as sanding blocks for future projects. You can also use scrap wood for wooden dowels in furniture making.
When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
You can apply stain with either a brush, or a rag. Work the stain in against the grain, and with it as well. You need not be neat, just get a smooth, even coat on the wood. Then, wipe immediately for a lighter tone, or leave it on for up to fifteen minutes before wiping for a deeper tone.
When you have skill in woodworking, you have the power to take a raw natural resource and make things with it. Use the tips, tricks and techniques to make your life a more enjoyable one. Build that deck you want behind the house, or restore an old piece of furniture, either for yourself or for profit.