Many people have hobbies which they truly enjoy. Whether they like to play competitive sports or video games, nothing compares to those who enjoy the activity of woodworking. In fact, just by utilizing the tips below, you can start to benefit from all the rewards this hobby will bring to your life.
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
Create sanding blocks you can reuse. Cut 6 blocks from scrap wood in the size of the sandpaper you use. They should be 2.5″ by 4.75″. Spray some adhesive on your blocks and on the cork tile. Put one piece of cork on each block and line it up flush. This piece should then fit you hand fairly well and be secure enough to not slip. Use a utility knife to trim the sandpaper around the edge of the block. Label each block.
Woodworking can be expensive. The actual wood is one of the most expensive parts of any project. The rest of the cost is usually labor, glue and hardware. Sometimes you can save some money by buying a cheaper grade of wood for areas of your project that are not visible. Areas like drawers, backs and bottoms are excellent places to use this wood.
Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
We’ve written this article in order to give you some helpful hints which will make your woodworking projects more successful than ever. As long as you follow them one by one, you are sure to gain benefit from each. When you finish your next project with ease, you’ll be so glad you took the time to read this article.
Leave a Reply