Have you admired a beautiful piece of furniture and dreamed of creating such an item yourself? Do you have a need for a new shelf and want to build it on your own? Regardless of why you want to get involved in woodworking, the advice below will help you get your start.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
Use a socket when drawing an arc. Most shop owners have a variety of sockets that can be used for a variety of radii. For example, if you are wanting a radius of 10 millimeters, reach into your toolbox and grab a metric socket that size. You will get a perfect arc each time using this technique.
When applying stain, work in a well-lit and well-ventilated area. When you make sure your project is under the strongest light in your work area, you more easily spot drips, runs and any spots you missed. Ventilation is also important to protect your health, and even on small projects, strong fumes can affect you by making you feel sick or giving you a headache.
Sanding blocks are essential woodworking tools. You can create easy to reuse sanding blocks of your very own by simply cutting three-quarter-inch scrap lumber into rectangles measuring 4.75 x 4.50 inches. Cut pieces of cork tile to fit each block. Spray both the rectangle of wood and the rectangle of cork tile with adhesive and press them together. Allow to dry, then spray the backside of an entire sheet of sandpaper with adhesive. Place your newly made block on the sandpaper with the cork on the down-side. Allow to dry and then use a utility knife to cut the sandpaper around each block.
Choose the right wood for the job. Don’t use woods that are soft like pine when making a table top; soft woods scratch easily. Additionally, consider different types of woods offer different colors.
Keep your woodworking tools well sharpened. Dull tools produce messy work and can be hard to use. Not only that, but it can injure you if you have to use excessive force to cut. A sharp tool gives you a cleaner and more efficient cut. You can really notice the difference.
To get off on the right foot, use these tips as you plan out your next project. That will allow you to use the right techniques to ensure your end result is on target. Once you get that project under your belt, you’ll be able to complete others and truly enjoy woodworking as a hobby.
Leave a Reply