Woodworking can be a fascinating hobby or it can be a lucrative career. Whether you would like to do it for a living or would simply like to pursue it as a weekend hobby, this article is for you. Use these tips to help inspire you to become a better woodworker of this fascinating art.
Anytime that you begin a new project you must consider your safety first. Be certain you always have the right safety equipment, and use your tools properly. Always keep the tool guards on, since they are there to keep you safe. You don’t want to start in your workshop and end in a hospital bed.
Use stair gauges as a crosscut guide. To use, clamp the gauges to a carpenter square. After this, you will have to mark each of the notches. If you place the on the tongue that’s on your carpenter’s square, this means that together you can use this as a good crosscut guide for the circular saw.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
Whenever you work with wood, wear a pair of safety glasses and a dust mask to keep yourself safe. When cutting or even hammering into wood, pieces can fly up into your eyes or be breathed in. This can lead to health issues which can end your enjoyment of this pursuit for good.
It is essential for you to have sharpened tools if you plan on working with wood. Dull tools can be dangerous since they are more prone to slippage. If you have no idea how to hone and sharpen your tools, you will need to learn how since there won’t always be someone around to do it for you.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
There is much to learn about woodworking but luckily it is an enjoyable skill to learn about. Many people find it to be a relaxing hobby while other pursue it as a full time passion. use the tips from above to enhance your love of woodworking and to help you enjoy it even more.