Whether you are a professional woodworker, or just do it as a hobby, there is always good reason to take time to learn more about the skill. There are always new tricks that are discovered, as well as new tools to hit the market to make your work easier. If you want to learn more you need to read the article that follows.
Use stair gauges for crosscut guides. Clamp these gauges to the carpenter’s square you have and be sure they’re matching up to the stair jack’s run and rise. Mark the notches in them. If you place them on the tongue you’re using for your carpenter square, that combo is a good crosscut guide for your circular saw.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
Check out the selection of videos available on YouTube if you would like to learn more about the hobby of woodworking. There are so many videos available from people of all skill levels that you will never be able to watch them all. You can even search for specific skills that you would like to learn.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.
A golf tee can fix loose door hinges. Take the door off its hinges, then remove the hinges themselves, then tap the tee into the screw hole. Cut the extra golf tee off and install the door again. The tee will provide the screw with something that it can bite into.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
When applying stain, work in a well-lit and well-ventilated area. When you make sure your project is under the strongest light in your work area, you more easily spot drips, runs and any spots you missed. Ventilation is also important to protect your health, and even on small projects, strong fumes can affect you by making you feel sick or giving you a headache.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
As you read at the beginning of this article, there is always something new to learn about the field of woodworking, no matter how long you have been doing it. Now that you have read the article, you know that is true because you have surely learned something yourself. Now all you need to do is apply the tips so that they become part of your routine.
Leave a Reply