Woodworking is a craft like no other. You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.
Practice some table saw safety. When crosscutting with a table saw, set your cut length with the block clamped to your fence. Do not use your fence directly for avoiding get kicked back by a board directly. You need to clamp the block of wood to your fence before your blade. The board’s end is free of the fence when you cut and after you cut.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When you are cutting narrow pieces of wood, never use your fingers to guide them. It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade. This will ensure safety while you perform dangerous tasks.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
Dry fit your wood before using glue. If you attempt to readjust the pieces once glued together, you risk damage to your project. Dry fitting will help you see which pieces go in which spots.
Read all plans ahead of beginning a project. Unless full instructions are provided, you may end up not being able to complete your project. If there is something you don’t understand or something is missing, you could head to your home improvement store to see if someone there could offer suggestions.
Look to video to learn different woodworking techniques. Seeing woodworking in action is a really powerful way to learn. It is, after all, a very hands on skill you’re picking up. Look to YouTube as a start. There are many videos there going over top skills related to woodworking.
You should make sure you use the right species of wood for the project you are working on. Don’t use soft wood like pine as a table top, because it scratches very easily. Also pay attention to the colors of different species of wood.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
Save time in the shop by locating the most level spot on your floor and marking it with a brightly colored duct tape. When you do this, you can quickly and easily maneuver your mobile table saw into position for board cutting. You will not have to check the level and make time consuming minor adjustments every time you want to cut a board.
The craft of woodworking is unlike most others. It is a medium where humans take a strong natural resource and work in ways that leaves anything from pieces of art to buildings. Whatever your personal level of involvement in woodworking is, this article had tips and tricks in it you can surely use.
Leave a Reply