Woodworking can be a fascinating hobby or it can be a lucrative career. Whether you would like to do it for a living or would simply like to pursue it as a weekend hobby, this article is for you. Use these tips to help inspire you to become a better woodworker of this fascinating art.
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.
When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.
Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
Remember the quote, “Measure twice, cut once.” When it comes to cutting wood, you always want to ensure you have the right measurements before you begin cutting. Otherwise, you will have to buy more wood, which will cost you a lot of money. You can avoid this dilemma by ensuring proper measurements.
Always be on the lookout for good woodworking tips. If you meet professionals, ask them for their best tips. If you find a magazine chock full with tips, pick it up so that you can keep it in your archive. Even record TV shows that have woodworking in them to glean any tips you my find there.
Before even beginning a woodworking project, make sure you have an adequate and proper place to work in. You definitely don’t want your living space filled with sawdust. Some woodworking supplies, such as stains, varnish and paint strippers, have noxious fumes. Ideally, you will have a detached garage or a shed to work in since an outside space is an ideal location.
You can make a sanding block even better. Cut a small slot about 3/8 of inch deep, a little less than an inch from the outside edge. Run it the entire length of the block. Now the sandpaper will fit into this slot easily, and it will stay in place more securely.
There is much to learn about woodworking but luckily it is an enjoyable skill to learn about. Many people find it to be a relaxing hobby while other pursue it as a full time passion. use the tips from above to enhance your love of woodworking and to help you enjoy it even more.
Leave a Reply