You might be one of those people who thought they weren’t good with their hands. However, if you take the time to give it a try, woodworking can show you how magical your hands can be. With just the right tips, outlined below, you’re going to be able to make all kinds of pieces. Keep reading!
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
Choose the right type of wood for the project that you are doing. Some woods cannot handle the same stress that other woods are able to. If you don’t know how different types of wood will work, spend time learning about both the wood and the project you wish to complete.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
Whenever you work with power tools, be sure your clothing is tucked in properly. Any loose clothing or long, dangling hair or jewelry can easily become tangled in the tool, leading to injury or other disaster. Tuck everything in, pull back your hair, take off dangling jewelry and then get down to work.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Get a handle on how a wood takes to staining prior to choosing a wood for a project. Paint grade wood is considered a lower quality wood, if you buy stain grade it means that the grain of the wood will be more attractive when stained. Particleboard will take on too much stain, while veneer doesn’t take on enough. Choosing the right wood makes sure your project becomes all that you planned.
When working with wood, consider the grade of wood you are using. Wood can be costly and it is not always necessary to use a high-cost wood. If budget is a concern, look at the durability and strength of different woods that may come in a little cheaper and still work for your project.
Woodworking can be expensive. It is a good idea to go over your plans before you start and make sure that the project fits within your budget. Price out all materials by making a list of the required supplies and then go to the local hardware store to figure out the total cost.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
You may think that you can’t be an expert at woodworking, but if you stay interested and learn as much as you can, your expert status is all but guaranteed. Just take it slowly and use everything you have learned here to make great-looking wood pieces that you can show off to everyone. Good luck!