Whether you are a novice woodworker or a seasoned professional, you probably understand that knowledge is the key to working with wood. Woodworking still requires an ample amount of skill as well; however, without information and learning, those skills may not do you an good. This article hopes to pass on some great suggestions to help you enjoy woodworking.
Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.
Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
If you enjoy doing woodworking as a hobby, try to use all the materials that you buy and throw away as little as possible. Scrap pieces of plywood or hard wood can be used as sanding blocks for future projects. You can also use scrap wood for wooden dowels in furniture making.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
All woodworking shops should have stair gauges. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. This will transform your carpenter’s square from a straight-line tool, into a straight guide for your saw. Every cut will be straight from now on.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
It is hard to imagine a world without woodworking. Those that can shape simple wood into imaginative or useful pieces are often sought after. If you hope to be successful with woodworking, or just boost your knowledge, it is hoped that this article has given you proper insight into enjoying working with wood.
Leave a Reply