Woodworking is a craft like no other. You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Whenever you work with power tools, be sure your clothing is tucked in properly. Any loose clothing or long, dangling hair or jewelry can easily become tangled in the tool, leading to injury or other disaster. Tuck everything in, pull back your hair, take off dangling jewelry and then get down to work.
Before practicing advanced woodworking techniques, make sure you’ve got the basics down. Typically those advanced techniques rely on you knowing the basics like the back of your hand. If you don’t, you’ll more than likely find learning to be a very frustrating experience. So start slow, and work up from there.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.
Wear gloves when you are doing your woodworking projects. A natural part of woodworking is the risk of getting splinters and other injuries from the wood. If you find it difficult to work well with the gloves you should shop for a pair that does not hinder your performance so that you can be safe.
The craft of woodworking is unlike most others. It is a medium where humans take a strong natural resource and work in ways that leaves anything from pieces of art to buildings. Whatever your personal level of involvement in woodworking is, this article had tips and tricks in it you can surely use.
Leave a Reply