Woodworking is a craft and a skill that has been around for centuries. It is a valuable trade to have experience with and can be infinitely useful in many ways. Skilled woodworkers can earn a good living with their hands and many enjoy woodworking just for the joy of it.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
If you’re renting a new tool, ask for a brief tutorial. A lot of the time they have specialists that will help you learn to ue the tool more easily than if you tackle it by yourself. Some places even have detailed handouts with tips that will help you get better results with the new tools you are using.
Whenever you work with power tools, be sure your clothing is tucked in properly. Any loose clothing or long, dangling hair or jewelry can easily become tangled in the tool, leading to injury or other disaster. Tuck everything in, pull back your hair, take off dangling jewelry and then get down to work.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
If you have your own table saw, you will eventually have to crosscut some wood. This can bring your fingers very close to the saw guard and blade. If the saw kicks back, you could be headed to the hospital. It is best to cut a block of wood to push the wood through the saw with.
Know your wood’s properties before you use it. Wood designated as “paint grade” is lower in quality and not suitable for staining. Veneer and particleboard are different too. Veneer doesn’t absorb stain and particleboard absorbs more. It is crucial to get the perfect wood for your creation.
Rulers don’t like to stay in pockets, but you need them to be handy! Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws. Keep them both in the same exact pocket. The magnet should keep your ruler in the pocket.
Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.
Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.
Fumes from oil-based stains can be harmful to animals, as well as humans. To avoid fumes, try using a water-based stain. Water-based stain comes in a wide variety of colors, even more than their oil-based counterparts. And the application process is the same whether you are using oil, or water-based stain.
As you already know, woodworking is a very valuable skill. Whether you are building a big projects such as a house or smaller projects such as a small bird house, woodworking has so much to offer. Hopefully the tips from above have given you ideas on new ways to use this valuable skill.